Home Blog Page 7

Your Connection is Not Private in Chrome

0

Your Connection is Not Private is a very common error and occurs very often, users find ways to fix Your Connection is Not Private error so they can surf the internet without any interruption. There are a number of methods that you can use to fix Your Connection is Not Private issue.

We should not forget the fact that with emerging technology, the numbers of cyber-crimes are also increasing. While working on the internet you come across a number of websites out of which some are safe and some block out your trusted sources.

When this happens, your computer can easily get hacked. To save you from this Google has made some security measures that warn you when you are about to open or log into an insecure site. So, you can consider Your Connection is Not Private as a warning or message instead of the error.

How to Fix Your Connection is Not Private in Chrome

So, let us discuss the methods or ways to fix Your Connection is Not Private error.

Method 1 – Move to the Website with Insecure Connection

If none of the above methods work out for you then you can try this method.

Step 1: The first thing you need to do is go back to the website, where chrome showed you Your Connection is Not Private error.

Step 2: Next, go down a little and see if there is any Advanced link option and click on it.

Note: Going ahead with an insecure connection is a bit risky to your private thus, try this method only when no other options work and use this as a temporary solution only.

Also, use this method when you are absolutely sure about the website you want to open is safe and secure.

Method 2 – Adjust Date and Time

When you are trying to open a page or website, Google safety verify the SSL certificate as well as its time & date and if found consistent your screen shows this Your Connection is Not Private error.

Follow the steps given below to try this method:

Step 1: Open your system tray and then select the “Date & Time” icon.

Step 2: Right-click on the icon and select “Adjust Date/Time” option.

Step 3: A new window will open where you can easily select or change the date & time of your system if it’s not correct.

Step 4: Next, save the changes you have made and then close all the windows & refresh your computer.

Method 3 – Clean Browsing Data

If your computer is clumped with a large amount of browsing data then you are likely to encounter such error often. Thus, the basic solution to this problem is to clear the browsing data using the following steps:

Step 1: Open Google chrome and then click on the three-dot icon situated on the top right corner of the window.

Step 2: A drop-down menu will show-up > choose Settings option in it.

Step 3: Then, in the settings window search Show Advanced Settings option.

Step 4: Next, navigate to the privacy tab > select Clear Browsing Data Button.

Step 5: A new window will open in that click on the browsing history that you want to erase and then click on the “Clear Browsing History” button.

Step 6: Finally, restart your computer and then check if the error is resolved or not.

Method 4 – Use Incognito Mode

This method helps you to Fix Your Connection is Not Private error by detecting extensions that might be responsible for Your Connection is Not Private error.

To try out this method follow these steps:

Step 1: At first, you need to open the incognito mode which can be done by two ways:

Open Chrome and click on the three-dot icon situated on the top right corner > then from the drop-down menu Select New Incognito option.

OR

You can press CTRL + Shift + N key combination and this will open a new incognito window.

Step 2: In the new incognito window that opens, check if the website that was showing error before, open up or not. If it opens up then some extension is responsible for the error.

Step 3: Next, click on the three-dot icon situated on the top-right corner of the window and then click on the Settings option from the drop-down menu.

Step 4: You will be redirected to a new window in there on the left side you will see an option named as Extensions, click on it.

Step 5: A list of all extensions will be shown then search the extensions that are responsible for the error and maybe hampering with SSL Connection.

Step 6: After that uncheck the enable option of those faulty extensions.

Method 5 – Disable Antivirus Software or Firewall Settings

This method is also useful as some of the antivirus that we use are sensitive and they forbid or do not allow us to use a website, if it detects some error or if something is wrong. Thereby, it is advisable to see the settings of the antivirus program and see if you can switch off or turn off the “SSL Scan” option.

However, if you can’t locate the SSL scan option in the settings of the antivirus that you are using then, you can try to resolve this error by turning off the antivirus. At last, do save the changes you have made and then check if the error has solved or not.

Conclusion

So, these were the best opted and efficient methods you can use to resolve Your Connection is Not Private error on in Google Chrome. I hope you found the methods shared in this article useful. Always remember to follow these methods step by step to avoid further problems of any kind related to your computer.

What is IDP.Generic – Is it a Malware or False Positive

0

IDP.Generic is not program-specific; from all the times that it has been reported, it is usually detected by Avast antivirus software. That does not mean the software is inaccurate or untrustworthy. Everything it displays is for a reason, and definitely worth a look.

The detection of the IDP.Generic works in a similar way. It is detected as a virus and can be infecting a broad range of files- from games all the way to python files. However is it really harmful, or is it just a false positive?

Is IDP.Generic A Malware?

IDP.Generic is basically an Identity Protection detection component of your antivirus. It causes any generalized file to get detect upon running an antivirus scan. The data identified are decided based on the rate of any suspicious activity, and thus get flagged. To this, the antivirus program gets triggered and flags IDP.Generic as a malware harmful for your computer.

Should You Ignore IDP.Generic?

Under normal circumstances, you should not be ignoring any warnings put forth by antivirus programs of your computer. Everything listed in there is for a reason, so it would do you no harm if you just glance through it. Coming to the IDP.Generic, it has mostly been a false positive for a lot of users. Although, it would not hurt to take a look at it; so that you can be 100 percent certain.

The most basic way to confirm if it is a legitimate virus is to install another antivirus program besides the one you have and check if IDP.Generic still pops up on the list. You can even use VirusTotal for this purpose. VirusTotal is a website where you can upload content to see if it contains any malware.

It basically plays the role of antivirus software, except for the fact that it is online. If it does not list IDP.Generic, then you are good to go. On the other hand, if it does, then you should look deeper into the file or just delete it to be on the safer side.

What Causes IDP.Generic False Positive?

IDP.Generic false positive can be caused due to a variety of reasons; one of the most common ones being an outdated antivirus program. Your security software is likely to list IDP.Generic as a harmful malware if it is not up to date with the latest version, thus giving you inaccurate results.

Maybe IDP.Generic was classified as a dangerous malware at one point in time; that is why your software still continues to believe it is one. However, after extensive research, it has proved to be harmless. That is why it is essential that you keep all the critical software of your computer up to date at all times; just to avoid mishaps and errors such as this.

What Should You Do If You Find A False Positive?

Under normal circumstances, the safety software of your computer is likely to block all harmful files. In order to protect your computer from getting infected as per underlying protocol.

So if you do find a false positive in your computer, your computer is likely to try and get rid of it too. Thus, the first thing you should do is instruct your antivirus program not to block the file. Following are the steps for users using the Avast antivirus software:

Step 1 – To start with, open your Avast antivirus application.

Step 2 – Go to the tab that says ‘Protection,’ and click on ‘Virus Chest‘.

Step 3 – Once redirected to the Chest, right-click on the name of your file and select the option that says ‘Restore and add to exclusions’.

Although these steps are for the Avast antivirus program, they are most likely to be the same for any other safety software that your computer may have. Your basic outcome should be to restore the files getting a false positive, one way or another.

Conclusion

As a user, you need to understand that your antivirus program will go to whatever extent it sees fit to keep your device safe from any form of cyberattacks. That is what it is there for, and you should ideally let it function the way it does. So that your device does not get infected in any way. Running antivirus scans from time to time is crucial, especially after you conduct massive downloads or installations on your computer.

Further, it is also essential that the safety software you use stays up to date. So that it is always prepared to fight any foreign content attacking your files. As long as it is instructed as to which data are trustworthy and which ones are not, you are good to go. Trust your antivirus software at all times; whatever actions it is taking is for your own benefit.

The Active Directory Domain Services is Currently Unavailable

0

The Active Directory Domain Services is currently unavailable error says your system is unable to find and connect to the printer, that’s why the process is stopped and cannot go in the forward direction. Active Directory Domain is a domain controller. This process allows the computer to manage and look for all the resources.

How to Fix The Active Directory Domain Services is Currently Unavailable Error

The Active Directory Domain Services is Currently Unavailable Error means the problem with permissions, drivers, UAC, etc. Solutions of this problem are mentioned below:

Method 1 – Give Access to the PrinterPorts and Windows

Step 1 – Press “Windows + R” and a search bar will open. Type “regedit” in it and then press Enter.

Step 2 – After going into the registry editor, follow the following path:

HKEY_CURRENT_USER > Software > Microsoft > Windows NT > CurrentVersion

Step 3 – Select Permissions after doing Right-click on Devices.

Step 4 – Then select your account in the list and tick the checkboxes. No item should be checked under the column of Deny.

Step 5 – Do the same thing for PrinterPorts and Windows.

Step 6 – Restart the computer and then check that problem is solved

Method 2 – Recognize the Printer Using Some Other Applications

Step 1 – Right-click on the desktop and then select Text Document.

Step 2 – Write something in the blank space. Click File and then print.

Step 3 – Now a new file will pop up containing all the printers which are on your computer. Hopefully, the problem will be resolved, and windows will start detecting the printer.

Method 3 – Reset the Printer Spooler Settings

The spooler service is a sort of software program, and it is responsible for managing all print commands being sent to the computer printer. It is visible to all the users, and it helps in canceling a print if required. It allows us to see how much prints are left and manage it.

Step 1 – Apply the shortcut “Windows + R” and a search box will open in the run application.

Step 2 – Write “services.msc” in the search box and tap on the Enter.

Step 3 – Find the option “Print Spooler” in the list of services. Double-click on it to open its properties

Step 4 – Click on the “Stop” button present under the Service status and tap “OK” to save the changes

Step 5 – Now we have disabled the service, so we can focus on deleting the printing files.

Step 6 – Navigate to the path mentioned here: C:\Windows\System32\spool\PRINTERS There can be a need for permission to access the following folder. If prompted, then press continue

Step 7 – Delete all the files in the Printers folder and then close the Window.

Step 8 – Go back to the service tab and Start the “Print Spooler” service. And the startup type should be Automatic.

Step 9 – Reboot your PC and check that the printer has started working correctly.

Method 4 – Add the Printer Manually and Update the Drivers

Step 1 – Apply the shortcut “Windows + R” a search box will open. Write a “control panel” in the search box and then press the Enter button.

Step 2 – Select Large icons and then click on “Device and Printers“.

Step 3 – Find your printer and then select “Remove Device“. A UAC is going to pop up asking you to confirm the action as an Administrator.

Step 4 – Then click on “Add a printer”. The printer should be connected properly to your PC.

Step 5 – Go into the manufacturer’s website of your PC. Download the latest drivers available. Apply the shortcut “Windows + R” and then write “devmgmt.msc”  in the search box.

Step 6 – Go into the subcategory of “Print queues“, and then after right-clicking on your printer, select “Update Driver“.

Step 7 – Now, you will see two options. Browse my computer for driver software option should be selected by you.

Step 8 – Install the latest drivers on your PC. Reboot your PC and check that the problem is resolved.

Conclusion

So now we think that The Active Directory Domain Services is currently unavailable error is resolved by now. As the above methods have worked well in solving this error.

Widevine Content Decryption Module Error

0

Widevine Content Decryption Module is a process that allows its users to play DRM-protected HTML5 Media on their computers. This module is usually inbuilt along with Chrome, allowing the running of mostly just video and audio that may be included in a webpage. The error restricts the user from playing visuals and flashes the words Widevine Content Decryption on the screen of the browser. As users, nobody would want errors like this to interrupt their surfing.

How to Fix Widevine Content Decryption Module Error

We have some specific solutions to your problem you should take a look at to rectify it instantly and get ahead with your browsing.

Method 1 – Reinstall Chrome

If none of the above-mentioned solutions work for you, the only option you have left is to reinstall Chrome altogether. The Widevine Content Decryption Module is associated with Chrome inside and out, so reinstalling the browser entirely is likely to resolve your problem. Reinstalling it will do nothing but set your browser to the default version, which should be compatible with WidevineCdm. The way to reinstall Chrome is mention below:

Step 1 – Open the Run Command dialogue box by pressing the Windows key and the letter R simultaneously.

Step 2 – Manually type in the words “cpl” into the dialogue box and press Enter.

Step 3 – By doing this, you will be redirected to a Window with a list of all the applications on your desktop. Find Google Chrome and click on ‘Uninstall‘.

Step 4 – Once done, go to the official Google website and Download the latest version of Chrome on your computer.

Step 5 – Check to see if the Widevine Content Decryption Module error continues to occur.

Method 2 – Update the Widevine Content Decryption Module

As mentioned before, the Widevine Content Decryption error can be caused when the user has not updated his Module. So, the first and most basic recommendation is that you go to the settings of your browser and make sure it is up to date. If it is not, then follow the steps given below to go about achieving its latest version:

Step 1: To start with, right-click on the icon for the Google Chrome browser. Then, click on the option that says ‘Run as an administrator‘.

Step 2: When Chrome opens, go to the address bar at the top and manually type in words then hit ‘Enter‘.

chrome://components

Step 3: Next, you will be redirected to a screen that lists all the components that your browser is inclusive of. Underneath each entry, there will be a button that says ‘Check for Update‘. Hunt for the one entry that says ‘Widevine Content Decryption Module‘ and hit that button.

Step 4: Once done, refresh the page to see if the button says ‘Up to Date‘.

Step 5: If it does, restart your computer, and you should be able to surf without the error.

Method 3 – Disable Antivirus Software

With the new updates of Windows 10, a new Security Software has been installed by Microsoft. It plays the essential role of keeping your device free of any malware, by simply restricting all sorts of installations including the Widevine Content Decryption Module. Even though the Module is not harmful to your computer, it is kept from downloading due to the safety protocol by Windows.

Therefore, what you need to do is disable this safety software via the Windows Defender Security Center. If you use any other anti-virus programs, it is suggested you disable them too- only until after you have installed your Module. Once installed, you can go back and re-enable all security software again.

Method 4 – Give Full Control to the WidevineCdm Folder

If you have the Widevine Content Decryption Module readily installed, it will undoubtedly have a folder in your computer’s storage. What you need to do to get rid of the error is to make sure the folder has all the privileges it needs to run. To check whether the WidevineCdm folder has full control, follow the given steps:

Step 1: Press the Windows key and ‘R’ at the same time to open the Run Command.

Step 2: Then, manually type in these words into the dialogue box and press Enter.

%userprofile%/appdata/local

Step 3: You will now be redirected to a folder in your computer’s storage. Here, hunt for the folder titled Google → Chrome → User Data.

Step 4: Once you have the user data in front of you, navigate to the folder that says ‘WidevineCdm’. Right-click on it, and select ‘Properties’.

Step 5: In the properties, go to the ‘Security‘ tab among the list of tags on the screen and make sure that under ‘Permissions‘, the entry saying ‘Full Control‘ is tick-mark. In case it is not, then follow these steps to tick-mark it:

  1. Above the list of ‘Permissions,’ there will be a button that says ‘Edit.’ Click on it.
  2. The area which had the tick-marks will now turn into checkboxes. Here, manually check the box that says ‘Full Control’ and then ‘Apply’ your respective changes.

Step 6: Lastly, restart your computer to see if the error still continues.

Method 5 – Delete WidevineCdm Folder

Another way to get rid of the error is to simply delete the module entirely and then reinstall it using Chrome. The way to go about it is as follows:

Step 1: To start with, follow the first 3 steps mentioned in Method #4.

Step 2: Once you’re inside the ‘User Data’ folder, locate the folder named ‘WidevineCdm‘ and right-click on it. Click on ‘Delete‘.

Step 3: Next, go to the Recycle Bin of your computer and empty it, to completely erase all traces of the folder from your system.

Step 4: Then, open the ‘Task Manager‘ of your desktop, and right-click on it to ‘Run as Administrator‘.

Step 5: Now, from the list of tasks displayed, end all the ones associated with Chrome. For this, just right-click on each entry you wish to end and click on ‘End Task‘.

Step 6: Lastly, restart your computer and open Chrome. You should no longer be experiencing the error.

Conclusion

By catering to the provided methods, you should be able to resolve the Widevine Content Decryption Module error one way or another. It is a prevalent error that comes with a set of straightforward solutions that can easily be tried at home.

Nvlddmkm.sys Blue Screen Error in Windows 10

0

Nvlddmkm.sys error is one that a lot of users have reported in the past. It causes your screen to go completely blue, and eventually, the computer to shut down or restart. Do not worry; you are not the only one seeking a solution to Nvlddmkm.sys (Video_TDR_Failure) error. It is very common for users to have Windows 7 or above, which is why the following are some methods you can try out on your own to get your screen back to normal.

How to Fix Nvlddmkm.Sys Error in Windows 10

Method 1 – Run A Memory Check On The System

In a lot of cases, it is your computer’s RAM that is causing the Video_TDR_Failure (Nvlddmkm.sys) error. The RAM is actually responsible for a lot of common errors, so you need not worry. All you need to do is run a Memory Check on your system. Here is how:

Step 1 – Press the Windows key and the alphabet ‘R’ simultaneously to open the Run Command.

Step 2 – Then, manually type in words mdsched.exe in the dialogue box and click on ‘OK.’

Step 3 – Now, there are two ways you can proceed further. Follow the one that you think is most suitable for your computer. You can either click on ‘Restart now and check for problems’ (this is the more recommended solution) or you can choose ‘Restart now and check for problems the next time I start my computer.’

Step 4 – Either way, your Memory Check is going to start. Wait for up to 15-20 minutes for it to finish.

Step 5 – Once the Check gets over; all the errors will be displayed on your screen. Proceed towards rectifying them using suitable methods.

Method 2 – Uninstall Conflicting Programs

Sometimes, the error of the blue screen is bound to occur if some recent installation or software is not fully compatible with your computer. Any conflicts among installed programs could be causing the error.

In this case, you need to figure out if the error began occurring immediately after you installed something on your device. If you are able to crack it, then you should either restore the updates or uninstall the recently added programs as a whole. The way to go about doing this, of course, differs for each program.

Method 3 – Reinstall Graphics Card Driver

Since Video_TDR_Failure (Nvlddmkm.sys) error involves the color of the screen, the issue is highly likely to lie in the graphical settings of your computer. Therefore, rectifying the Graphics Card driver of your system could rid you of the error. Following are the steps for the same:

Step 1 – First, begin by restarting your computer. Do this by long-pressing on the power button. Do this at least 2 times, until the ‘Preparing Automatic Repair’ option appears.

Step 2 – After the diagnosing of your PC is complete; you will be taken to a screen that says ‘Startup Repair‘. There, click on ‘Advanced Options‘.

Step 3 – Next, from the ‘Choose an Option‘ menu, select ‘Troubleshoot,‘ and once again go to ‘Advanced options.’

Step 4 – From the next screen, click on ‘Startup Settings‘ and then click on the option that says ‘Restart‘ at the bottom of the screen.

Step 5 – Following the next instructions on the screen, press F4 or F5 Keys to enter into safe mode for the startup, with or without a network – whatever works out more convenient for you.

Step 6 – Once the rebooting process is complete, press the key for Windows and X at the same time, and click on the Device Manager.

Step 7 – Click on the ‘Display Adapters’ tab to expand it and right-click on NVIDIA to uninstall it.

Step 8 – Check to ‘Delete the Driver Software for this Device’ and then click on ‘OK’ on the prompt window.

Step 9 – Next, install the latest version of the driver once again from the official website.

Step 10 – Navigate to this given address: C:\Windows\System32\Drivers and rename the file from sys to nvlddmkm.sys.old. Then, press ‘OK.’

Step 11 – Next up, find the NVIDIA folder in your computer’s C Drive and copy-paste the nvlddmkm.sy_ file to the desktop.

Step 12 – Then, open the command window and manually type in the following command:

expand.exe nvlddmkm.sy_ nvlddmkm.sys

Step 13 – Now, copy the newly created sys file onto the C drive and into the C:\Windows\System32\Drivers folder.

Step 14 – Lastly, restart your system to see if the blue screen is gone.

Method 4 – Run a Disk Check on Your System

Sometimes, the reason why you may be experiencing the Nvlddmkm.sys error is because of certain faults in the disk. Thus, running a disk check will indicate the presence of any error. However, a disk check does have some backdrops. It involves a risk of data loss. That is why you need to make sure all your files and data is backed up before you proceed with this method. Once your back up process is complete, follow the listed steps to go about running the disk check:

Step 1 – To start with, press the Windows key and the key ‘X’ at the same time.

Step 2 – Next, click on the ‘Command Prompt’ to run it as Administrator.

Step 3 – In the next window, manually type in this command and press Enter:

chkdsk /f c:

Step 4 – You will now be redirected to a page asking your permission to run a disk check and reboot your computer. To allow, press ‘Y’ and then press Enter.

Step 5 – Now, exit the command and just restart your computer. It will take around 20 minutes for the disk checking process to finish.

Step 6 – Once the process ends, all the errors being faced by your computer will be listed. Rectify them.

Method 5 – Update Your Windows

With the coming of new updates every season, as a user, you will, of course, want to keep your system up to date to be able to enjoy new features. You should check for updates every few days, as an outdated version of Windows could easily be the cause behind the error. The way to go about it is written for your reference:

Step 1 – Press the Windows key and the alphabet ‘I’ at the same time to be taken to the Windows Settings.

Step 2 – Over there, click on the option that says ‘Update & Security.’

Step 3 – Select the tab that says ‘Windows update,’ and click on ‘Check for Updates’ on the next screen. If an update is available, download it to see if the error continues.

Method 6 – Change the Graphics Card

When you run too many games or applications simultaneously or with small intervals, it may cause overloading of the Graphics Card of your computer, thus causing the error to appear. In this case, you will have to take your device to the nearest store to see if that is where the problem lies; followed by the replacement of the card. Then check if the error continues to occur.

Conclusion

The nvlddmkm.sys error is one that has been encountered by several users in the past. It is a very common mishap, so you need not panic if you experience it too. However, if none of the solutions work, then it is probably an item in the motherboard of your computer that is causing the problem. It is highly recommended you take your device for repair to an electronics store in this case.

A Problem Has Occurred in BitDefender Threat Scanner

0

Bitdefender is an antivirus that protects your PC from cybercriminals and other similar threats. Every time you shut down or restart your PC you may face this error message:

A problem has occurred in Bitdefender Threat Scanner. A file containing error information has been created at c:\windows\temp\Bitdefender Threat Scanner.dmp. You are strongly recommended to send the file to the developers of the application for further investigation of the error.

If the message is ignored then your computer will restart automatically after a while. This file is generally not readable in notepad. The cause behind this kind of error is the Spybot’s corrupted file. Usually, one of its files gets corrupted and you face “A Problem Has Occurred in BitDefender Threat Scanner” issue.

How to Fix A Problem Has Occurred in BitDefender Threat Scanner Error

Method 1 – Fix Corrupted Files

Step 1 – Click Start and select file explorer.

Step 2 – Type c:\Program files\spybot-search and destroy 2 on the top of the screen in the address bar.

Step 3 – Locate your file name SDAV.dll

Step 4 – If you cannot find the file then download the file.

Step 5 – Once downloaded, locate the file and copy the file.

Step 6 – Go to the “Spybot search and destroy 2” folder and paste the file in the folder.

Step 7 – If the file is already is present then check the size of the file. Select the file and go to properties.

Step 8 – The file should be more than 32KB if it’s not 32KB + then download another.

Step 9 – When you find the correct file then replace it.

Method 2 – Remove All temporary Folders

This pop-up message may be due to the accumulation of too many files in the Temp folder. Follow the steps to reduce accumulation:

Step 1 – Open the Run function box. Hold the windows key with the letter R at the same instance.

Step 2 – Type “temp” on the Run box and press enter for the further execution of this command.

Step 3 – Open the Temp folder. Select all the files Ctrl + A.

Step 4 – Delete all the files using the delete button.

If these steps fail then follow the steps stated below:

Step 1 – You have to the same as you did before, Open Run box.

Step 2 – Type “%temp%” on the blank space in the command area and press Enter. The temp window will open up.

Step 3 – Now you have to select all the files, for doing so you have to take your mouse cursor on this window and click on it.

Step 4 – Select all files using Ctrl + A.

Step 5 – Use the delete button to remove all the files.

This process may resolve the BitDefender threat.

Method 3 – Download and Run patch

If you have in case updated the Bitdefender antivirus, then you must be probably facing this Bitdefender Threat Scanner.dmp error.

Step 1 – Check the type of Windows operating system you are using and accordingly download the patch.

Step 2 – Run the patch file with checking the compatibility to resolve the problem.

Method 4 – Repair Spybot’s Damaged files

The BitDefender threat scanner.dmp error may be due to the Spybot’s damaged file case.

Step 1 – Go to the Windows search bar and type file explorer, press Enter.

Step 2 – Type “SDAV.dll” in the search bar of this window and press enter. (This may be the file which caused the error).

If you are unable to find this file by searching in the Spybot’s search and destroy then you need to proceed to the steps listed below.

Step 1 – But if the file is missing then the other way is to download the missing file.

Step 2 – After downloading, place the file in SpyBot search and destroy 2 folders.

Step 3 – Then, verify the size of the downloaded file, it should be more than 32KB. If the downloaded file exceeds 32KB then this is the file otherwise download until it exceeds 32KB. (If the file size is less then there is a high chance that the downloaded file is corrupted)

Step 4 – After confirmation of the size, replace this downloaded file to its specified place.

Step 5 – After replacing you may find that the BitDefender threat scanner.dmp error is resolved or disappeared.

Conclusion

These are the methods to resolve the A Problem Has Occurred in BitDefender Threat Scanner Error.

Laptop Plugged in Not Charging in Windows 10

0

If a user gets hampered by a cranky message appearing on the laptop screen saying Laptop Plugged in Not Charging then the user can get increasingly frustrated. Laptop Plugged in Not Charging error can stem due to various reasons. However, observances suggest that the functioning of the battery might not always be the underlying problem in various cases.

Interestingly, in those cases, one can quickly rectify the Plugged in Not Charging error using the following troubleshooting solutions. One common problem is invariably some hardware causing certain malfunction and thereby the Laptop Plugged in, Not Charging error.

How to Fix Laptop Plugged in Not Charging Error

Let us look at possible solutions to solve Laptop Plugged in Not Charging problem.

Method 1 – Reset the BIOS Settings

BIOS is a firmware that comes pre-installed in your computer device. It is the first software to run when powered on and ensures hardware initialization. It is perhaps where the core of the problem lies. Observances suggest that disabling certain settings in BIOS can fix the flaw. To solve the problem, the user needs to check if the accepted charging level is 100% or not.  Simply, perform the following steps to solve the error.

Step 1 – Power off your computer.

Step 2 – Now, you need to go to your system BIOS. For this, press the power button and F2 key together. The BIOS will appear on the screen.

Step 3 – Navigate to ‘Power Management’ in the menu and then click on ‘Primary battery charge configurations’ on the left panel of the screen.

Step 4 – Lastly, check whether there is some custom limit set along with the radio button ‘Standard.’

Step 5 – Do not forget to save the settings in the end.

Restart the device and check whether the error persists or not.

Method 2 – Reinstall the Power Management Driver or the Battery Driver

The out-dated version of the battery driver in the device can be a major contributing factor to ‘Plugged in, not charging‘ error. One troubleshooting error is to uninstall and re-install the battery driver. For this, simply execute the following steps.

Step 1 – Begin with the control panel of the device and then navigate for and open ‘device manager.’

Step 2 – The device manager window will appear on the screen. Now, double-click on the ‘batteries’ option to expand.

Step 3 – Simply, right-click on all the options that appear and uninstall them one by one.

Step 4 – Now, along the menu bar, click on the second option ‘Action’ and then hit ‘Scan for hardware changes from the drop-down menu.

Step 5 – Now, the device manager will look for hardware issues and eventually will detect the absence of hardware drivers. Simply follow the on-screen prompts to install the battery drivers again.

After the above process is over and all the drivers get reinstalled, check whether the error persists or not.

Method 3 – Re-Connect the Battery

Try dis-engaging the battery from the laptop and reconnecting by using the following steps.

Step 1 – To begin with, make sure that your dell laptop is powered-off.

Step 2 – Now, turn the laptop over and remove the battery out by untying the locks over the edges.

Step 3 – After removing the battery, clean the edges of the battery and the contact points of the connector with a dry cloth. Do not use any external liquid solution as it might create some damage to connecting points.

Step 4 – Lastly, attach the battery back into the laptop properly. Turn the computer on and check if the error persists or not.

Method 4 – Change the Charger

If the power cord or the connectivity location is not at fault, then there is a strong probability that the laptop charger is at fault here. Laptop users are in a vast majority across the world, so initially try charging the laptop with someone’s charger and check if the problem persists.

If the charger is at fault here, then consider buying a new one from your nearest dell shop or online retail markets. We advise you not to use the default charger to charge the laptop as it poses a threat to the health of the battery.

Method 5 – Check the Power Connection

Sometimes, the problem is not the laptop but the power connector. If your laptop charger is attached to a power extension that further connects to the main switch, then there might be the problem of inadequate power supply. Indeed, the resultant is a simple error as the extension only provides enough power to keep the laptop running.

To provide an adequate amount of power supply, you simply need to connect the charger directly with the wall power outlet. Unless the connectivity location is running on a low voltage, one can simply rectify the problem. Just connect the charger directly with the power outlet on the wall.

Method 6 – Check Laptop’s Power Cord

As mentioned above, the obvious reason for dell laptop battery ‘Plugged in but not charging’ error is that the batter might have died. One similar but less gnawing problem here is the port connected with the power adapter.

Instead of the battery or more precisely the rectangular power adapter, the power cord can create the error. Check the connector by connecting it with another ac adaptor and check if the problem persists. Moreover, the connectivity location’s low voltage might also be the cause here.

of course, it goes without saying that if the power cord is at fault here, the solution lies in replacing (or repairing) the power cord or the connector location as the case may be. The dell charger, as well as adapter, are easily available at various dell outlets or dell spare parts shop or online retail markets and restore your laptop experience to normalcy.

Method 7 – Check the Battery

The battery might or might not be at fault here. We advise checking the battery before ordering a new one. As mentioned above, the vast majority of people use dell laptops around the world. Moreover, the design of the battery and battery connector is the same for a wide range of dell models.

So try to attach some other battery in your computer to eliminate the chances of a non-damaged battery. Also, simultaneously try placing your battery into some other laptop. Try charging both the laptops using different combinations of the charger.

If the battery connected in your computer gets charged and the battery connected in some other laptop does not charge, then the solution is to replace the laptop’s battery.

Moreover, if the battery connected in your computer still does not get charged, but the battery connected in some other laptop gets charged, then your battery is not at fault here.

Method 8 – Customer Service Center

If all the above solutions fail, then, the remaining factor is your laptop’s motherboard. To be more precise, the charging section of the battery can get damaged here. It is not a common experience, but it might be the last remaining factor here. Get your laptop checked to the nearest service center as soon as possible. If you do not get the problem checked then some other issue might get created in no time.

Conclusion

The above-described solutions have been effective to resolve Plugged in, Not Charging problem. One should address the problem as it not only poses a serious threat to the quality of user experience but also might affect the health of your laptop’s battery. Hopefully, the above solutions have helped you to solve the ‘Laptop Plugged in Not Charging’ error.

What is Vulkan RunTime Libraries, Should You Remove It

0

Vulkan Runtime Libraries is a collection of some software programs to provide one or more native program functions. Basically it consists of many different programs and functions which are commonly used by various programs. It enables a software program to execute with its complete functionality by providing the add-on program resources that are essential to the primary program. Vulkan Runtime Libraries is not any malware or virus. This means it is not going to damage your system so there is no need to remove or delete it.

What is Vulkan Runtime Libraries

Vulkan Runtime Libraries is used for computer graphics. An API is a group of subroutine definitions, protocols, and tools for the building application software. It is a new graphic standard and a 3D graphics application programming interface like OpenGL, WebGL, Allegro, Mantle, and Microsoft DirectX, which are used for gaming and better 3D performance.

Let’s say Vulkan is the latest version of OpenGL if DirectX12 is the latest version of gaming. It is intended to offer more balanced CPU/GPU usage and higher performance also. It is also a better distributer of work amongst multiple CPU cores.

How to Uninstall It

If you are sure that you want to delete or remove it from the computer, then follow the steps which are mentioned below:

Step 1 – Type Run in the search box and then select the topmost result

Step 2 – Write “appwiz.cpl” and then tap “OK”

Step 3 – Find Vulkan Runtime Libraries in it. Right-click it and then select uninstall to delete it

If you have uninstalled it and then want to install it back then you have to uninstall the graphic drivers. Here are the steps:

Step 1 – Type “device manager” in the search box and open it.

Step 2 – Find your graphic hardware device. Tick the “Delete the driver software for this device” after doing right-click your graphic driver and select “Uninstall device”.

Step 3 – Restart your PC and Windows going to install all missing drivers automatically.

In some cases it doesn’t, then go to Device Manager again, right-click on video driver in your hardware device and select “Update Driver”.

Conclusion

I hope that now you a bit clear about Vulkan Runtime Libraries and what to do with it. So this application is never like a virus instead it tries to improve our visuals.